SL-7602 Smoke Density Chamber Tester

Product Model : SL-7602

This tester has been applied to determine smoke density and wildly accepted by many industries, such as plastics, rubbers, cover fabrics, painted surfaces, woods, etc.

Inquire Now

Detailed description

3 Phase Flammability Testing Equipment , NBS Smoke Density Chamber

Application

This tester has been applied to determine smoke density and wildly accepted by many industries, such as plastics, rubbers, cover fabrics, painted surfaces, woods, etc.

Standards

According to NBS ENS711 of ASTM E662 etc.

Technical parameters

According to difference material for Flaming test and non-flaming both conditions

Temperature of sample	23±2°C
Relative humidity	50±5℅
Size of sample	Length and width of sample all are 75±0.5mm, thickness is 1±0.2mm, thickness of foam and plastic is 8±0.5mm
Irradiance level of furnace	Surface of sample is 2.5±0.05W/cm²
Distance between the furnace and sample surface	38mm
Burning gas	Propane gas and the purity is ≥95
Measurement of chamber	L1110mm * W750mm * H2040mm
Smoke box size	L914mm * W610mm * H914mm
Diameter of light beam	Approx. 38mm
Test range	1) Optical transparence is 100%-0.00001% 2) Smoke density grade is 0-924 for 6 shelves, automatic transmission
Test mode	Non-flaming mode and flaming mode
Accuracy of photometer	±3%
Exchange shelves accuracy	±7 for smoke density value
Power supply	3-phase is 380±10%V/AC, 50Hz

Related products More>

Thermal Conductivity System Tester

Thermal Radiation Flame Propagation Tester

OSU Heat Release Rate Tester

SL-N01 Torsion Testing Machine For Steel Wire Bar Prestressed Wire Enamelled Wire Alloy Material Torsion Machine

Building Component Fire Test Vertical Furnace

Insulation Material Maximum Use Temperature Tester

Automotive Interior Material Vertical Combustion Tester

Safety Nets Flammability(Flame Retardant) Tester