Stationery Tester Pen Clip Clamping Force Tester

Pen Clip Clamping Force Tester Application

This machine is the pen clip trigger spring 2 ~ 3 times, the pen set fixed in the pen clip clamping force instrument on the fixture, and the insert inserted between the pen set and pen clip, inserted into the depth of (10 ± 1) mm, open the instrument so that the insert out of the pen clip. Check whether the value of the insert out of the pen clip is in line with the requirements of the standard QB/T 1655-2006 Table 3.

Standards

QB/T 1655-2006 clause 7.14, QB/T 2775-2006 clause 5.6

Technical parameters

1. Surface roughness of accessories: Ra0.32μm ~ Ra0.63μm, thickness (0.80±0.02) mm, surface hardness HRC＞58 metal insert A

2. Surface roughness of accessories: Ra0.32μm ~ Ra0.63μm, thickness (3 ± 0.02) mm, surface hardness HRC＞58 metal insert B

3. Sensor: 5kg

4. Stroke: 0～300 mm

5. Volume (W×D×H): 82×18×41 cm

6. Weight: 60kg

7. Power supply: AC220V 50HZ